HobbyKing
F3A SK3 COMPETITION SERIES 28 POLE OUTRUNNER
| Voltage | 10S Lipoly |
| RPM/V | 240kv |
| Timing | 20-25 degrees |
| Internal resistance | 0.021 Ohm |
| Max Loading | 75A |
| Max Power | 2770W |
| Shaft Diameter | 8mm |
| Shaft Length | 50mm |
| Mounting screw Spacing | 75mm (M4x4) |
| Weight | 590g |
Includes:, • Collet style prop driver, Specs.:, Turns:6T, Motor Poles:28,
Turnigy SK3 Competition Series motors are the newest addition to ...5 Reviews
HobbyKing
TURNIGY AERODRIVE SK3 2822-1275 BRUSHLESS OUTRUNNER WITH SHORT SHAFT
| Turns | 40T |
| Voltage | 2~3S |
| RPM/V | 1275 |
| Internal resistance | 0.185 Ohm |
| Max Power | 95W |
| Shaft Dia | 3.0mm |
| Weight | 31g |
| Motor Plug | 3.5mm Bullet |
| Includes | Prop adapter |
Note:, This version has a flush length shaft - ideal for small Quadracopter projects! Easy to mount in Quad frames. Please refer to images., Max Loading:8A,
Turnigy SK3 Motors are the next leap forward in motor ...5 Reviews
HobbyKing
HOBBYKING RED BRICK 20A ESC
| Max Amps | 25A |
| Ubec | 5v / 2A |
| Cells | 2~3s Lipoly |
| Size | 48mm x 8mm 26mm |
| Weight | 20g (Inc Wires) |
5 Reviews
HobbyKing
TURNIGY MULTISTAR 45 AMP MULTI-ROTOR BRUSHLESS ESC 2-6S (OPTO)
| Constant Current | 45A |
| Input Voltage | 2-6 cells Lipoly |
| BEC | None (OPTO) |
| PWM | 8 KHz |
| PCB Size | 50mm x 30mm |
| Weight | 63g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Poles Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews
HobbyKing
TURNIGY AE-100A BRUSHLESS ESC
| Output | Continuous 100A, burst 115A up to 10 seconds. |
| Input Voltage | 2-6 cells lithium battery or 5-18 cells NIMH battery. |
| BEC | Linear 4A @ 5V |
| Control Signal Transmission | Optically coupled system. |
| Max Speed | 2 Pole |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Size | 71mm (L) * 34mm (W) * 17mm (H). |
| Weight | 79g. |
| Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
| Factory default settings | Brake |
| Battery type | Li-xx (Li-ion or Li-Po) |
| Low voltage cutoff threshold | Soft cut-off (2.6V) |
| Timing setup | Low |
| Soft Acceleration Start Up | Normal |
| Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
The Turnigy AE series are based on new powerful microprocessor. ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 120A TURBO SENSORED BRUSHLESS 1/12TH 1/10TH ESC
| Motor limit | 4.0T |
| Resistance | 0.0003 ohm |
| Operating current | 120A |
| Burst Current | 760A |
| Battery Type | Lipo/nimh |
| Initial Brake | 10% ~ 80% |
| Drake Brake | 0% ~ 30% |
| Motor Timing | Incrementa |
| Acceleration Punch | 1-9 |
| Forward Limit | 0% ~ 90% |
| Reverse limit | 10% ~ 100% |
| Drive Frequency | 8Khz, 16Khz, 24khz |
| Brake Frequency | 1,2,4,8,16Khz |
| Dead Band | 2, 3, 4, 5, 6 |
| weight | 63g |
Spec:, Max Voltage:, 2s Lipo / 6 cell Nimh, Bec Current:3A, Bec Voltage:6v, Programming Options:, Operation Mode:, Forward/Brake/Reverse; Forward/Brake Only,
Introducing the Turnigy Trackstar 120Amp TURBO 1/12 and 1/10 sensored ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 80A TURBO SENSORED BRUSHLESS 1/12TH 1/10TH ESC
| Motor limit | 10.5T |
| Resistance | 0.0004 ohm |
| Operating current | 80A |
| Burst Current | 380A |
| Battery Type | Lipo/nimh |
| Initial Brake | 10% ~ 80% |
| Drake Brake | 0% ~ 30% |
| Motor Timing | Incremental |
| Acceleration Punch | 1-9 |
| Forward Limit | 0% ~ 90% |
| Reverse limit | 10% ~ 100% |
| Drive Frequency | 8Khz, 16Khz, 24khz |
| BrakeFrequency | 1,2,4,8,16Khz |
| Dead Band | 2, 3, 4, 5, 6 |
Spec:, Max Voltage:, 2s Lipo / 6 cell Nimh, Bec Current:3A, Bec Voltage:6v, Programming Options:, Operation Mode:, Forward/Brake/Reverse; Forward/Brake Only, weight:, 45g (without cables),
Introducing the Turnigy Trackstar 80Amp TURBO 1/12 and 1/10 Sensored ...5 Reviews
HobbyKing
HOBBYKING 70AMP OPTO ESC WITH 5 AMP EXTERNAL UBEC
| Brake Setting | On/Off |
| Setting for battery type | LiPo or NiCd /NiMh |
| Low-voltage protection | low / medium / high |
| Motor timing setting | low/medium/high |
| Start up type | soft/medium/hard |
| Helicopter mode (Governor) | On/ Off |
| Motor Direction | Cw/Ccw |
| PWM operating frequency | 8KHz / 16KHz |
| LVP type | slow down/dead cut |
| Continuous current | 70A |
| Max current (10 seconds) | 100A |
| Standard configuration | 5.5V/5A (external) |
| Jumper setting | 5/5.5/6 volts |
| Dimensions | 70*28*20 mm |
| Weight | 80g |
User Programmable settings:, Specs:, Input Voltage:, 2-6s LiPo (7.4- 22.2v) / 5-18 NiMh, BEC type:, OPTO/UBEC 5amp (external),
Here's an ESC for those that like to push their ...5 Reviews
HobbyKing
HOBBYKING 100AMP OPTO ESC WITH 5 AMP EXTERNAL UBEC
| Brake Setting | On/Off |
| Setting for battery type | LiPo or NiCd /NiM |
| Low-voltage protection | low / medium / high |
| Motor timing setting | low/medium/high |
| Start up type | soft/medium/hard |
| Motor rotation | cw/ccw |
| PWM operating frequency | 8KHz / 16KHz |
| Continuous current | 100A |
| Max current (10 seconds) | 150A |
| Standard configuration | 5.5V/5A (external) |
| Jumper setting | 5/5.5/6 volts |
| Dimensions | 70*32*20 mm |
| Weight | 108g |
User programmable features:, Mode:, Normal or Helicopter mode, LVP type:, slow down or dead cut, Specs:, Input Voltage:, 2-6s LiPo (7.4- 22.2v) / 5-18 NiMh, BEC type:, OPTO/UBEC 5amp (external),
Here's an ESC for those that like to push their ...3 Reviews
HobbyKing
TURNIGY MULTISTAR 10 AMP MULTI-ROTOR BRUSHLESS ESC 2-3S
| Constant Current | 10A |
| Input Voltage | 2-3 cell Lipoly |
| BEC | Yes (linear) |
| BEC Output | 5V/2A |
| PWM | 8 KHz |
| PCB Size | 22mm x 17mm |
| Weight | 16g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Pole Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 45 AMP MULTI-ROTOR BRUSHLESS ESC 2-6S
| Constant Current | 45A |
| Input Voltage | 2-6 cells Lipoly |
| BEC | Yes (Switching) |
| Output | 5.5V/6A |
| PWM | 8 KHz |
| PCB Size | 50mm x 30mm |
| Weight | 58g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Poles Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 30 AMP MULTI-ROTOR BRUSHLESS ESC 2-4S (OPTO)
| Constant Current | 30A |
| Input Voltage | 2-4 cells Lipoly |
| BEC | None (OPTO) |
| PWM | 8 KHz |
| PCB Size | 41mm x 24mm |
| Weight | 32g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Poles Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 20 AMP MULTI-ROTOR BRUSHLESS ESC 2-4S (OPTO)
| Constant Current | 20A |
| Input Voltage | 2-4 cells Lipoly |
| BEC | None (OPTO) |
| PWM | 8 KHz |
| PCB Size | 41mm x 24mm |
| Weight | 25g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Poles Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 30 AMP MULTI-ROTOR BRUSHLESS ESC 2-4S
| Constant Current | 30A |
| Input Voltage | 2-4 cells Lipoly |
| BEC | Yes (Switching |
| BEC Output | 5.5V/4A |
| PWM | 8 KHz |
| PCB Size | 41mm x 24mm |
| Weight | 29g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Poles Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 20 AMP MULTI-ROTOR BRUSHLESS ESC 2-4S
| Constant Current | 20A |
| Input Voltage | 2-4 cells Lipoly |
| BEC | Yes |
| BEC Output | 5.5V/4A |
| PWM | 8 KHz |
| PCB Size | 41mm x 24mm |
| Weight | 25g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Poles Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews